Soil Moisture Meters

Delta-T WET150 SDI-12 Digital Multi-Parameter Sensor — Water Content, Bulk/Pore EC and Temperature in Soils, Composts & Growing Media

Brand: Delta-T
34,800 EGP

The Delta-T WET150 is an accurate digital multi-parameter SDI-12 sensor measuring water content, electrical conductivity and temperature in soils, composts and growing media, with ten pre-configured measurement sets and fully customisable parameters, units and soil calibrations.

Quantity:
– +

Delta-T WET150 SDI-12 Soil Moisture, EC and Temperature Sensor

The WET150 is an accurate and highly versatile digital multi-parameter sensor that measures water content, electrical conductivity and temperature in soils, composts and artificial growing media from a single insertion.

It can be used individually with an SDI-12 meter or as a networked group of sensors with any logger or controller supporting SDI-12 communication; an SDI-12 network can address up to 62 sensors. The Delta-T GP2 logger and controller is ideally suited to networked WET150 applications.

The WET150 offers ten pre-configured measurement sets (aM! and aM1!…aM9!) as sequential or concurrent measurements, with or without CRC error checking. Sets aM! to aM8! can be customised for parameter order, units, soil calibrations and EC temperature compensation, while aM9! is a fixed native format (permittivity, bulk EC, temperature) for Delta-T loggers and meters.

Key features

  • Measures water content, electrical conductivity and temperature in soils, composts and growing media
  • Standard SDI-12 communication, compatible with SDI-12 version 1.3 CRC error checking
  • Ten pre-configured measurement sets, sequential or concurrent
  • Outputs permittivity, square-root permittivity, bulk EC, pore water EC (at soil or reference temperature), water content in % or m3.m-3, temperature in °C or °F
  • Selectable EC units: S.m-1, dS.m-1, mS.cm-1, mS.m-1 (default), µS.cm-1
  • Built-in generic soil calibrations: Mineral, Organic, PeatMix, Coir, MinWool, Perlite, plus custom a0/a1 values
  • Configurable EC soil parameter (default 4.1), compensation temperature (default 25°C) and temperature coefficient (default 2%/°C)
  • Settings retained in memory after power loss, with a single factory-reset command

Product Specifications

ManufacturerDelta-T Devices Ltd
ModelWET150
Measured parametersWater content, electrical conductivity, temperature
Native output parametersƐr (real relative permittivity), ECb (bulk EC) in mS.m-1, Temperature in °C
Available output parametersƐr, water content in % or m3.m-3, ECb, ECp at soil temperature, ECp compensated to reference temperature, temperature in °C or °F, square root permittivity
CommunicationSDI-12, conforms to SDI-12 specification version 1.3 (CRC error checking supported)
Network capacityUp to 62 sensors per SDI-12 network
Measurement sets10 pre-configured sets (aM! and aM1!…aM9!), sequential or concurrent; aM!–aM8! customisable, aM9! fixed
Generic soil calibrationsMineral (a0 1.6, a1 8.4), Organic (1.3, 7.7), PeatMix (1.16, 7.09), Coir (1.16, 7.41), MinWool (1.04, 7.58), Perlite (1.06, 6.53), Custom
Custom calibration rangesa0: 1.00 to 5.00; a1: 3.00 to 15.00
EC soil parameterDefault 4.1; valid range 0.00 to 10.00
EC compensation temperatureDefault 25°C; valid range 0.00 to 100.00 °C
EC temperature coefficientDefault 2%/°C linear; valid range 0.00 to 10.00 %/°C
EC unitsS.m-1, dS.m-1, mS.cm-1, mS.m-1 (default), µS.cm-1
Lower soil moisture limit for ECp (soil parameter 4.1)Mineral 12.67%, Organic 17.72%, PeatMix 21.22%, Coir 20.30%, MinWool 21.43%, Perlite 24.57%
Error code (ECp not calculable)-8020

Write a Review

Your email address will not published. Required fieled are marked

Your Review:

Files to download

Related Products

Other related products explored by visitors

Easy Test whatsapp
Cart :
Subtotal
$480

The maximum purchase for this product is () pieces.

| Compare List ()