The TS-1000 is a handheld water quality analyzer (reader) built on a photometric RGB measurement principle with a white LED light source. It tests seven chemical elements in swimming pool water, six in aquarium water and ammonia nitrogen in three ranges, and stores up to 100 results by batch.
The TS-1000 is a water quality analyzer of the photometer (reader) type that combines optoelectronic technology with microprocessor control. It is used to detect seven chemical elements in swimming pool water and six chemical elements in aquarium water, and to measure ammonia nitrogen in three ranges: 0-20 mg/L, 0-100 mg/L and 0-1000 mg/L.
An ultra-high-brightness white LED light source and a high-performance photoelectric receiver working on the RGB three-dimensional measurement principle give the instrument good resistance to interference. A 32-bit single-chip microcomputer reduces the number of peripheral components and improves reliability, while the memory keeps up to 100 test results organised by batch number for later review.
Testing is straightforward: install the batteries, collect the water sample, wipe the outside of the sample tube dry, calibrate, select the test item with the M key, place the test strip in the sample tube and move it up and down 20 times, then put the tube in the cell holder and read the result on the display.
| Model | TS-1000 |
|---|---|
| Instrument Type | Water quality analyzer – photometer (reader) |
| Swimming Pool Water | 7 chemical elements |
| Aquarium Water | 6 chemical elements |
| Ammonia Nitrogen Ranges | 0-20 mg/L; 0-100 mg/L; 0-1000 mg/L |
| Measuring Principle | RGB three-dimensional measurement |
| Light Source | Ultra-high-brightness white LED |
| Detector | High-performance photoelectric receiver |
| Processor | 32-bit single-chip microcomputer |
| Memory | Up to 100 test results, managed by batch number |
Your email address will not published. Required fieled are marked
Other related products explored by visitors
The maximum purchase for this product is () pieces.