Drinking Water Test Strips 16 in 1 – Multi-Parameter Water Quality Kit

Drinking Water Test Strips 16 in 1 – Multi-Parameter Water Quality Analysis

These multi-parameter test strips check 16 drinking-water parameters with a single strip: total hardness, free chlorine, total chlorine, iron, copper, lead, nitrate, nitrite, MPS, fluoride, cyanuric acid, ammonia chloride, bromine, total alkalinity, carbonate and pH. They are intended as a complete water check-up before consumption, are easy to use and give results in 1 minute.

The strips use new chromogenic agents and highly sensitive chromogenic reaction activators to perform a semi-quantitative analysis: each pad changes colour and is matched against the colour chart. Polymer Hydrophobic Isolation technology separates the pads to prevent cross-contamination between them.

For reliable results, keep wet fingers away from the strips, read them in daylight or under a 6500K LED, and hold the strip horizontal, as running colours can darken the pads. Match the colours within 30–45 seconds, because they keep changing after 60 seconds; if a colour falls between two blocks, record the higher value for safety.

Key Features

• 16 parameters tested with one strip
• Covers hardness, chlorine, metals (iron, copper, lead), nitrate, nitrite, fluoride, alkalinity and pH
• Results in 1 minute
• Semi-quantitative colorimetric analysis using highly sensitive chromogenic reaction activators
• Polymer Hydrophobic Isolation technology to prevent cross-contamination between pads
• Simple dip-and-read method

Package Contents

• 100 test strips