The Draminski HMM measures moisture content (10–80 %) and temperature (1–100 °C) inside baled hay and straw with a probe pushed into the bale. It stores up to 50 readings, recalls their average, minimum and maximum, and offers three moisture curves for different bale pressing forces.
The Draminski HMM, made by DRAMIŃSKI S.A. in Poland, is a handheld instrument for estimating the moisture content of baled hay and straw. It measures changes in the electrical conductivity of the material around the probe electrodes, converts them into a moisture reading in percent on the LCD, and also shows the temperature measured by a sensor in the probe tip.
Knowing moisture content is essential for producing high-quality hay, for safer storage and for preventing damage to the harvested crop, because excessive moisture leads to fungal attack and rot. It is equally valuable when buying and selling forage, as moisture is the major factor affecting crop quality and therefore its value.
The meter is available in two versions that measure and are maintained in exactly the same way: HMM with a detachable probe on a 140 cm connection cable, and HMM FIX with the probe fixed to the electronic unit. For reliable results, take readings at several points of a densely packed bale, including its sides and ends; windrows and loose hay or straw should not be tested.
| Manufacturer | DRAMIŃSKI S.A. |
|---|---|
| Model | HMM (detachable probe on cable) / HMM FIX (fixed probe) |
| Measured Parameters | Moisture content and temperature |
| Moisture Measurement Method | Resistivity |
| Moisture Measuring Range | 10 – 80 % |
| Temperature Measuring Range | 1 – 100 °C |
| Resolution | Moisture 0.1 %, temperature 1 °C |
| Temperature Accuracy | ±1 °C |
| Moisture Curves | 3 (high / middle / low pressing force) |
| Moisture Reading Adjustment | −5 % to +5 % |
| Memory | Up to 50 readings (AVR / MIN / MAX) |
| Display | LCD, 3.5 digits |
| Keyboard | Membrane |
| Measurement Control | Single chip microcomputer |
| Power Supply | 1 x 9 V battery, type 6F–22 |
| Power Input | About 4 mA |
| Working Time on One Battery | About 100 h |
| Battery Low Indication | Automatic |
| Auto Power-Off | After 6 min without use |
| Probe Length | 56 cm or 200 cm |
| Connection Cable Length | 140 cm (HMM version) |
| Housing | PEHD (hard impact-resistant polyethylene) |
| Dimensions of Reader | 20.0 x 8.5 x 12.0 cm |
| Weight (with battery) | 800 g (version with cable); 665 g (version without cable) |
| Recommended Storage Temperature | 5 – 45 °C |
| Marking | CE |
Your email address will not published. Required fieled are marked
Other related products explored by visitors
The maximum purchase for this product is () pieces.