Out of Stock
Industrial & Scientific

MaxiFlo MU-HA Handheld Transit-Time Ultrasonic Flow Meter, Clamp-on Sensors for 15–6000 mm Pipes, ±1.0% Accuracy, Built-in Data Logger

Brand: MaxiFlo
Out of Stock

The MaxiFlo MU-HA is a handheld transit-time ultrasonic flow meter with clamp-on sensors for pipes from 15 to 6000 mm. It measures clean liquids at -16 to +16 m/s with ±1.0% of reading accuracy, without cutting the pipe or stopping the flow, and stores data on a built-in logger.

MaxiFlo MU-HA Handheld Ultrasonic Flow Meter

The MaxiFlo MU-HA is the handheld converter of the MU series of ultrasonic flow meters from Seil Enterprise Co. It uses transit-time (time-difference) technology: two ultrasonic pulses are sent through the liquid, one in the flow direction and one against it, and the difference between their transit times gives the average flow velocity, from which the volume flow is calculated.

The clamp-on sensors are mounted on the outside of the pipe and are fitted with magnets for easy installation, so the measurement is non-invasive: there is no need to cut the pipe or interrupt the flow, there is no contact with the medium and no pressure drop. With three sensor sizes the meter covers pipes from 15 mm to 6000 mm made of steel, stainless steel, cast iron, plastics, concrete or any material with a known sound velocity, carrying water, sea water and other clean liquids.

A little bigger than a PDA and operated with one hand, the MU-HA is intended for plant surveys, as a check meter for verifying mechanical meters, and for measurements at locations that are not currently metered. The built-in data logger records the process history, which can be downloaded to a PC or laptop and opened in a Microsoft Excel spreadsheet.

Key Features

  • Transit-time ultrasonic measurement with non-invasive clamp-on sensors
  • Pipe sizes from 15 to 6000 mm covered with three sensor sizes (S, M and L)
  • Flow velocity range -16 to +16 m/s, accuracy ±1.0% of reading
  • Repeatability ±0.2% ~ 0.5%, linearity 0.5%
  • Built-in data logger with download to a PC; RS-232 output
  • 16 site installation parameters stored for quick setup and operation
  • Ni-H battery running about 10 hours under maximum load, fully recharged in 6 hours
  • Sensors with magnets for easy mounting; no pipe cutting and no flow interruption
  • IP-65 converter, 200 x 85 x 30 mm
  • Kit and accessories housed in a rugged, compact aluminum carrying case

Optional Accessories

  • Ultrasonic thickness gauge
  • High-temperature sensor
  • Special sensor cable length (standard 5 m, optionally up to 400 m)

Product Specifications

ManufacturerSeil Enterprise Co. (MaxiFlo)
ModelMU-HA
TypeHandheld ultrasonic flow meter (MU series converter)
Measuring PrincipleTransit-time (time-difference) ultrasonic
Pipes MeasuredSteel, stainless, cast iron, plastics, concrete or any pipes with known sound velocity property
Pipe Sizes15 ~ 6000 mm
FluidWater, sea water and other clean liquids without high level of suspended particles
Fluid TurbiditySmaller than 20,000 ppm (mg/l) with a low level of air bubble content
Flow Velocity-16 ~ +16 m/s
Accuracy±1.0% of reading
Repeatability±0.2% ~ 0.5%
Linearity0.5%
Ambient Temperature-20 ~ +70 °C
Ambient Humidity85% RH max.
IP Rating (Converter)IP-65
PowerInternal Ni-H battery with AC charger
Battery OperationAbout 10 hours under maximum load; full recharge in 6 hours
OutputRS-232
Data LoggerBuilt-in data logger
Site Memory16 site installation parameters
Clamp-on Sensor Pipe RangesS: 15 ~ 100 mm; M: 50 ~ 700 mm; L: 300 ~ 6000 mm
Clamp-on Sensor Operating Temperature0 ~ 160 °C
Sensor IP RatingIP 65 (optionally up to IP68)
Sensor Cable Length5 m standard (optionally up to 400 m)
Dimensions200 x 85 x 30 mm
Weight9 kg including transit case

Write a Review

Your email address will not published. Required fieled are marked

Your Review:

Files to download

Easy Test whatsapp
Cart :
Subtotal
$480

The maximum purchase for this product is () pieces.

| Compare List ()