The Wintact WT8812 Compound Gas Monitor measures four gases at once: combustible gas (0~100 %LEL), oxygen (0~30 %VOL), hydrogen sulfide (0~100 PPM) and carbon monoxide (0~1000 PPM), with high/low alarms by LED, sound and vibration, data record and a rechargeable lithium battery.
The Wintact WT8812 is a compound gas monitor that shows four real-time gas readings on one LCD: combustible gas (0~100 %LEL), oxygen O2 (0~30 %VOL), hydrogen sulfide H2S (0~100 PPM) and carbon monoxide CO (0~1000 PPM), together with the temperature in ℃ or ℉. According to the manufacturer it adopts high-quality gas sensors with excellent sensitivity and repeatability, is easy to use and maintain, and meets the requirements of safety monitoring at industrial sites.
The shell is made of high-strength engineering plastics and compound non-slip rubber, described by the manufacturer as dust and explosion-proof. Each gas has a high and a low alarm limit that can be set by the user; when a limit is exceeded the monitor alarms in 4 forms: LED indicator flashing, reading flashing, sound beeps and vibration. The sound can be turned off in the set mode.
The monitor is widely used in petroleum, chemical, environmental protection, metallurgy, refining, gas transmission and distribution, biochemical medicine and agricultural research. It is powered by a DC 3.7V lithium battery (1800mAh) with a charging time of about 4 hours and a discharging time of about 8 hours. Do not charge the unit while measuring flammable gas, and never charge or disassemble the battery in an explosive environment.
| Manufacturer | Wintact |
|---|---|
| Model | WT8812 |
| Measured Gases | Combustible gas (LEL), Oxygen O2, Hydrogen sulfide H2S, Carbon monoxide CO |
| Combustible Gas LEL | Range 0~100 %LEL; resolution 0.1 |
| Oxygen O2 | Range 0~30 %VOL; resolution 0.1 |
| Hydrogen Sulfide H2S | Range 0~100 PPM; resolution 0.1 |
| Carbon Monoxide CO | Range 0~1000 PPM; resolution 1 |
| Unit Note | 1PPM = 1μmol/mol |
| Accuracy | ≤±5%FS |
| Response Time (90%) | Less than 30 seconds |
| Refresh Frequency | 1HZ |
| Indication Mode | LCD displays real-time data and system state; LED, sound, vibration indication alarm |
| Alarm | High/low alarm for each gas; 4 forms of alarm (LED indicator flashing, reading flashing, sound beeps, vibration); sound can be turned off |
| Data Record | Up to 1000 pieces of data; default record interval 5 seconds (adjustable) |
| Temperature Display | ℃ or ℉ (default ℃) |
| Temperature Compensation | -20℃ to 50℃ |
| Automatic Turning Off | Within 30 minutes without operation (can be disabled) |
| Working Voltage | DC 3.7V (Lithium battery capacity 1800mAh) |
| Charging Time | 4h |
| Standby Time | More than 8h on end (slightly change with working state) |
| Operation Conditions | Temperature: -20~50℃; Humidity: <95%RH non-condensing |
| Storage Conditions | Temperature: -10~55℃; Humidity: <85%RH |
| Standards | Q/HTY 023-2019; Gb3836.1—2010; GB3836.4—2010; GB15322.3—2003; JJG693—2011; JJG 365—2008; JJG695-2003; JJG915-2008; CE mark |
| Dimensions | 71*153*49mm |
| Weight | 218.7g with battery |
Your email address will not published. Required fieled are marked
Other related products explored by visitors
The maximum purchase for this product is () pieces.