Out of Stock
Industrial & Scientific

Konica Minolta SPAD-502Plus Chlorophyll Meter – Non-Destructive Leaf Measurement, -9.9 to 199.9 SPAD, 30-Value Memory, IPX-4 Water-Resistant

Brand: Generic
Out of Stock

The Konica Minolta SPAD-502Plus is a compact handheld meter that measures the chlorophyll content of plant leaves without cutting or damaging them. It displays SPAD values from -9.9 to 199.9, stores up to 30 readings with trend graph and average, and is IPX-4 water-resistant.

Konica Minolta SPAD-502Plus Chlorophyll Meter

The SPAD-502Plus is a compact, lightweight handheld meter that gives an indication of the amount of chlorophyll present in plant leaves without causing damage to the plant. The chlorophyll content of a leaf is related to the condition of the plant, so the reading can be used to determine when additional fertilizer is necessary, helping growers and researchers improve crop quality and increase crop yield.

The meter determines the relative amount of chlorophyll by measuring the absorbance of the leaf in two wavelength regions, red and near-infrared, and calculates a numerical SPAD value that is proportional to the amount of chlorophyll in the leaf. The measured SPAD value increases in proportion to the amount of nitrogen present in the leaf, which makes the instrument a practical tool for nitrogen fertilizer management.

Measurements are taken by simply inserting a leaf and closing the measuring head; the leaf does not have to be cut, so the same leaf can be measured throughout the growing process. The SPAD series is used on a wide variety of plants, including wheat, rice, corn and cotton.

Key Features

  • Non-destructive measurement: insert the leaf and close the measuring head; no need to cut the leaf.
  • Small measuring area: only 2 x 3 mm, suitable even for small leaves, with a sliding depth stop for accurate positioning.
  • High accuracy: within ±1.0 SPAD units (for SPAD values between 0.0 and 50.0 under normal temperature/humidity).
  • Trend graph display: changes in measurement data over time can be seen and abnormal values noticed at a glance.
  • Data memory: space for 30 measurements; data can be recalled or deleted, and the average of all data in memory is calculated automatically.
  • Water-resistant (IPX-4): can be used outside even in the rain. It is not immersible and should not be cleaned with water.
  • Low power consumption: LED light sources; one set of two AA-size alkaline batteries provides approximately 20,000 measurements.
  • Compact and lightweight: small enough to fit in a pocket and weighs only 200 g.
  • Reading checker: lets the user check that the meter is functioning correctly and providing accurate readings.

Package Contents

  • Depth stop
  • Strap
  • 2 AA-size alkaline batteries
  • Soft case
  • Reading checker

Product Specifications

ManufacturerKonica Minolta
ModelSPAD-502Plus
Measurement subjectCrop leaves
Measurement methodOptical density difference at 2 wavelengths
Measurement area2 mm × 3 mm
Subject thickness1.2 mm maximum
Subject insertion depth12 mm (with stopper having position adjustable from 0 to 6 mm)
Light source2 LED elements
Receptor1 SPD (silicon photodiode)
DisplayLCD panel showing 4-digit measurement value (values shown to first decimal place) and 2-digit number of measurements; trend graph of values in memory can also be shown
Display range-9.9 to 199.9 SPAD units
Memory functionMemory capacity for up to 30 values; calculation/display of average of data in memory also possible
Power2 AA-size alkaline batteries
Battery performanceMore than 20,000 measurements (when using new alkaline batteries under Konica Minolta test conditions)
Minimum measurement intervalApprox. 2 seconds
AccuracyWithin ±1.0 SPAD units (for SPAD value between 0.0 and 50.0 under normal temperature/humidity); an asterisk (*) is added to the display when the measurement exceeds 50.0 SPAD units
RepeatabilityWithin ±0.3 SPAD units (for SPAD value between 0.0 and 50.0, with no change in sample position)
ReproducibilityWithin ±0.5 SPAD units (for SPAD value between 0.0 and 50.0, with no change in sample position)
Temperature driftWithin ±0.04 SPAD units/°C
Operation temperature/humidity range0 to 50 °C; relative humidity of 85% or less (at 35 °C) with no condensation
Storage temperature/humidity range-20 to 55 °C; relative humidity of 85% or less (at 35 °C) with no condensation
Water resistanceIPX-4 (not immersible)
Other functionsWarning buzzer; user compensation factor
Dimensions (W × H × D)78 × 164 × 49 mm
Weight200 g (excluding batteries)
Standard accessoriesDepth stop; strap; 2 AA-size alkaline batteries; soft case; reading checker

Write a Review

Your email address will not published. Required fieled are marked

Your Review:

Files to download

Easy Test whatsapp
Cart :
Subtotal
$480

The maximum purchase for this product is () pieces.

| Compare List ()