Out of Stock
Industrial & Scientific

ULogm2s Reusable USB Temperature & Humidity Data Logger with 33,792-Reading Memory, IP66 Waterproof Case, LED/LCD Alarm and Auto PDF Report

Brand: Generic
Out of Stock

ULogm2s is a reusable temperature and humidity data logger with a USB interface, a 33,792-reading memory and an IP66 waterproof case. It is set up from a built-in page on its USB drive with no software to install, gives LED and LCD alarms and creates a PDF report automatically.

ULogm2s Multi-Use Temperature and Humidity Data Logger

The ULogm2s is a reusable data logger that records temperature and humidity with an internal sensor and stores up to 33,792 readings. Its IP66 waterproof housing, LCD display and OK / ALARM indicator LEDs make it well suited to monitoring frozen and chilled foods, cold-chain shipments by road, sea and air, greenhouses, laboratories and pharmaceutical storage.

Setup needs no software download: with recording stopped, hold the button until the display shows SET, remove the USB cover and plug the logger into a computer, open the configuration page from the logger's USB drive, then save the settings back to the drive. After unplugging, the display confirms the new settings. The logger generates a PDF data report automatically, with device and configuration information, alarm summary, record summary (lowest, highest and average temperature and MKT) and a chart of the recorded data.

From the factory it records every 5 minutes for 90 days; the interval can be programmed from 1 minute to 24 hours and the duration to 30, 60, 90, 120, 180 or 360 days. It runs on a CR2450 battery.

Key Features

  • Multi-use (reusable) temperature and humidity logging
  • USB interface: configuration and report download without installing any software
  • Memory of 33,792 readings
  • IP66 waterproof housing
  • LED + LCD alarm with OK / ALARM indicators
  • Programmable lower and upper alarm limits for temperature and humidity, with allowed time
  • Configurable record interval, record duration, start delay, time zone, date format, PDF language and °C / °F unit
  • Automatic PDF report, plus CSV data
  • High accuracy: ±0.5 °C / ±3 %RH

Product Specifications

ModelULogm2s
Instrument TypeMulti-use (reusable) temperature and humidity data logger
SensorInternal
Temperature Measurement Range-30 to 70 °C
Temperature Accuracy±0.5 °C (-20 to 40 °C); ±1.0 °C (other ranges)
Temperature Resolution0.1 °C
Humidity Measurement Range0 to 100 %RH
Humidity Accuracy±3 %RH
Humidity Resolution1 %RH
Memory33,792 readings
Recording Interval5 min (factory default), programmable from 1 min to 24 h
Recording Duration90 days (factory default), programmable 30 / 60 / 90 / 120 / 180 / 360 days
Display and AlarmLCD display with OK / ALARM LEDs (LED + LCD alarm)
OperationPush buttons
ConfigurationBuilt-in configuration page on the logger's USB drive, no software download
ReportPDF (automatically generated) / CSV
InterfaceUSB 2.0
Recording TypeMultiple-use
ProtectionIP66 waterproof
BatteryCR2450
Shelf Life2 years
Dimensions84 × 42 × 9.5 mm
Weight32 g

Write a Review

Your email address will not published. Required fieled are marked

Your Review:

Files to download

Easy Test whatsapp
Cart :
Subtotal
$480

The maximum purchase for this product is () pieces.

| Compare List ()